Archive

Category Archives for "Best Bandsaw Reviews"

Best 14 inch Bandsaw Jet JWBS-14DXPRO

Introduction

I am here today to give you my honest Jet JWBS-14DXPRO review – the one I wish I’d read instead of spending half a week trying to figure out what to buy while looking for the Best 14 inch bandsaw.  Hope these eight little words save you some time: this is the band saw kit you want.  It’s heavy, solid, safe and well-designed.

 

Jet JWBS-14 DX PRO Features

 

Think on the fact that JET has been around for almost as long as me (est. 1958, I believe), and you can feel good about moving this saw into your shop.  I want my bandsaw to work at least as hard as I do, and I want the company that designed and produced it to be long-lived and accountable.  So here I am endorsing this product with the voice of experience.

 

I will say upfront that I am not the best talker, but I consider this Jet JWBS-14DXPRO review to be worth the words. I have been woodworking since I realized that I could solve most of my problems with the right piece of wood, but solutions don’t always come cheap.  If you are going to invest in a band saw kit, you’ll want value for your dollar, and you’ll want these key features:

 

✓ A large, heavy, cast iron frame, strong and stiff, top and bottom

 

✓ 12” resaw capacity

 

✓ Two-speed belt drive

 

✓ Blade guide post with rack and pinion adjustment

 

✓ Blade tracking window so you can see what you’re doing

 

✓ Retractable blade guard that moves vertically from 0-12” resaw

 

Also nice to have, and comes with the Jet JWBS-14DXPRO:

 

✓ Upper and lower ball bearing guides reduce friction for longer blade life

 

✓ Quick release blade tension

 

✓ Enclosed stand with storage shelf and easy access door

 

✓ High tension spring design allows for greater blade tensioning

 

The thing looks good in my shop. It does everything I want it to do without fail. It wasn’t cheap, but it was worth every penny. I added some pros and cons in a list and the tech. specs from the website are below. Take this review for what it’s worth. This is just my honest opinion.

Jet JWBS-14DXPRO

 

 

Technical Details

Size / Blade diameter: 14 Inches –
Cutting Capacity Width (IN.): 13 ½ Inches –
Cutting Capacity Height: 12 Inches –
Blade Speed: 1500 and 3000 SFPM –
Table Size: 15 x 15 –
Maximum Saw Blade Width: ¾ Inches –
Minimum Saw Blade Width: ⅛ Inches –
Table Tilt: 10 Degrees Left, 45 Degrees Right –
Table Height From Floor: 43 ½ Inches

Best 14 inch bandsaw

 

 

Pros & Cons

 

ProsCons
-heavy, won’t drift during cutting

 

-price is right

 

-quality materials and construction – machine built to last

 

-blade changes are quick and easy

 

-12” resaw capacity means no riser blocks required

 

-quiet

 

-cast iron ball bearing blade guides – smooth and accurate, durable

 

-JET a tried and true name brand

-requires two people to get the saw onto the base during setup because it comes in two pieces

 

-guide adjustments are on the underside of the table, not ideal

 

-comes with a ⅜” blade – you’ll want to get more blades right away, depending on the job in question

 

 

 

Final Thoughts On Best 14 inch Bandsaw 

I don’t want to take any more of your time – this Jet JWBS-14DXPRO review has most, if not all, of what you need to consider when making your bandsaw purchase.  What’s left to consider is your OWN experience and purposes. This machine was built to take on most of the jobs you can think of – scrolling, recuts, arch cutting, precision cuts – for about as long as you can imagine owning a tool.  If you want a high-performance bandsaw with useful features, don’t waste your time on other options. I personally think this is the Best 14 inch bandsaw on the market and will take a heck of a lot of beating.

 

JET JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw Kit BUY IT HERE.

 

 

Best 10 Inch Bandsaw WEN 3962

Introduction

I was wondering which was the best 10 inch bandsaw to replace my old saw that had died the death.  Machines and I go way back to the first time I took apart a motor to see how it worked. Now that I am setting up shop for the next chapter of life (retirement) and investing my time in some serious woodworking projects for my grandchicks, I need quality tools that will last me without breaking the bank. I wanted the best 10-inch bandsaw for my buck, and I am pleased as punch to have found the WEN 3962 Two-Speed Band Saw.

Best 10 Inch Bandsaw Features

So what precisely makes this the best 10-inch bandsaw, compared to other options?

 

I will brag upfront that I am a fan of the WEN brand and have had good experiences with their customer service.  Even with a quality piece of equipment like this one, you can hit a speedbump. I like the two-year warranty, I like repair technicians who actually know their product, and I like real people at the end of a phone line. WEN’s got my business because I trust them.

 

You will also want some versatility and torque in your bandsaw, and the WEN’s got that too.  This machine handled my rough cuts, no sweat.  I have also had success with the intricate cuts that were required to make my wife her fancy new barn board bathroom signage.

 

WEN 3962 best 10 inch bandsaw

 

Here are the basics of what you can expect with this piece of equipment:

 

-a 3.5-amp motor

 

-a 9-3/4 inch throat, makes cuts up to six inches deep and 9-3/4 inches wide

 

-two-speed operation allows for speeds of either 1520 or 2620 RPM, take your pick

 

-versatility of blade – 72” blades anywhere from 1/8 to 1/2 inches in size

 

-nice, spacious work/bevelling table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees…  so much easier than using a hand tool, my friend (seems I have to learn everything the hard way).

 

-a sliding miter gauge

 

-flexible work light for the work table

 

-a fence for creating straight cuts (reversible, they thought of everything)

 

Technical Details

Weight: 73 lbs –

Dimensions: 20 x 25 x 58 –

Size: 10 Inches –

Motor: 3.5 amp –

Speeds: 1520 and 2620 FPM –

Table Dimensions: 14 x 12 ½” –

Swivel: 45 degrees –

Warranty: 2 years

 

WEN 3962

 

Pros & Cons

 

ProsCons
-excellent value = more $ to spend on your wife’s bathroom

 

-smaller bandsaw that can handle serious cuts and recuts

 

-versatile – works with different sized blades, dust hoses, handles a variety of jobs

 

-bells and whistles to give you that warm fuzzy “I love my workshop” feeling

 

-solid construction, with cast-iron table top

 

-ball bearing guides make operation smooth

 

-tried and true brand

 

 

 

-some assembly required

 

-requires adjustment depending on the job.  You have to “get to know” this bandsaw to get the most out of it.

 

-adjustment controls have personality, and aren’t quite on par with cutting capacity

 

Final Thoughts on the wen 3962

If you’re gearing up to build your very own log cabin, this bandsaw isn’t going to work for you. Get something bigger and more expensive. BUT, if you want the best 10 inch bandsaw, this is the one. You’ll find the WEN 3962 does all you want a 10” bandsaw to do, and then some – in fact, I think you’ll be pleasantly surprised by just what this machine can cut, and you’ll have fun using the extras to make your cuts precisely what you need. My experience has been very positive, largely because I can do so much with just the one machine, and much more than I could easily manage with a hand tool.

 

Buy Your WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10″

Best Benchtop Bandsaw Review

Introduction

I am very impressed with this saw! I am an artist. I make small tools and trinkets out of various materials in my home workshop. I’ve recently expanded into metal work and bought this saw to make small straight and angled cuts in metal. I’ve heard that bandsaws are cleaner and quieter than my old noisy chop saw, so I took the dive and got one. No regrets whatsoever. Here’s my benchtop bandsaw reviews to mull over. If you’re looking for the best benchtop bandsaw, this is a great deal!

Features Of This Best Benchtop Bandsaw

My WEN benchtop bandsaw came well packaged and undamaged. Shipping was not as problematic as I know becomes an issue with heavy duty gear. Unpacking and basic assembly was a sinch.

 

It was super helpful that many people have made YouTube videos of “unboxings” and easy to understand tutorials. I prefer videos or real humans to reading the instruction booklet. With the videos and a little common sense, I had no trouble getting it ready to use and making my first cut.

 

Before I bought it, I read online reviews and compared prices. I looked at four other 5” metal cutting bandsaws like it, and the WEN came out as almost the cheapest at $250. I took the same risk as everyone does, and bought the one with the 2nd best price hoping the cost did not stand for a bad quality machine. I am happy to report that it worked out, and I can honestly say that the WEN is not cheap but rather is “value for your dollar”. You’re welcome!

 

Now, I am a novice when it comes to cutting metal. I inherited a Dewalt chop saw, which is in my shop, but which I used maybe a total of 10-15 times since I got it. I’ve cut a bunch of things with my new WEN bandsaw now, so I am starting to have a bit more experience with it. I can report on a few things with confidence.

 

First, the cuts do take longer than with my chop saw. I timed a straight cut on a short ⅜ piece of iron, and the difference between the same cut on my chop saw and my bandsaw was about 30 seconds. The total time to cut the piece on the bandsaw was 60 seconds. Maybe it’s my age, but that interval did not stress me out. And, I was rewarded with a cleaner cut than my chop saw gave me.

 

Second, the WEN bandsaw is very manoeuvrable. The base is cast iron and locked in to allow the saw to rotate freely without any worry about the whole thing tipping over. From a beginner’s perspective, very awesome.

 

I make a lot of angled cuts with the type of projects I am into now. Making those angled cuts are a breeze with the WEN because of its manoeuvrable design and solid base with vice. With my other saw I’d have to move the whole darned thing around when trying to make adjustments to my cut.

 

Third, it is very reasonably priced. I almost paid $280 before shipping. I am glad I had realized it was, less expensive to buy it online here than it was at my local Home Depot.

 

Fourth, it’s durable! In general, I think that expensive things are quality and last long and cheap things have a short lifespan and need replacing more often. After doing some reading, I expected that however good the machine was, It’d likely come with a cheap blade that would need replacing soon. I was wrong. The blade has four hours (well over one hundred cuts) on it now, and it still works. This bodes well for how long the saw itself will hold up!

 

Fifth, it’s clean and quiet. I already mentioned this, but it bares repeating. My only experience with cutting metal, up until recently, was with my chop saw. Now, I think I could even go on creating art into the wee hours, as they say in Boston, without waking my neighbor. The accumulation of dust and shavings is not huge and stays in pretty much one spot at the back of the saw.

 

A quick list of a few other features:

 

  • Max cutting capacity on either side is about 5 inches
  • Motor housing is plastic but everything else, like the base and vice, is cast iron or metal
  • Doesn’t take up much room on my benchtop
  • Blade changing doesn’t look like it will be too tough (the unit disassembles logically)

 

A bonus is the fact that there are so many good youtube videos that feature this saw. I guess that is due to its popularity, but I just find it helpful. I found this one very helpful:

 

https://www.youtube.com/watch?v=NRTCn4JKRBs

 

I’ve included my quick pros and cons table below, but I feel like it is very lopsided. I encourage anyone buying this type of saw to check out a few different reviews before buying.

 

 

WEN 3975 best benchtop bandsaw

 

Technical Details

Item weight: 45 lbs –

Product dimensions: 27 x 14 x 15.5 inches –

Voltage: 120 volts –

Wattage: 540 watts –

Warranty Description: 2 years –

Motor: 4.5 amp

Pros & Cons

 

ProsCons
●      Solid but manoeuvrable and movable

●      Compact

●      Precise

●      Clean

●      2-year warrantee

●      Quieter

●      Replacement blades hard to find in brick and mortar stores

 

Final Thoughts

I have had a positive experience with this product. Out of the options I researched, it was one of the most reasonably priced. Compared to my experiences with other metal-cutting tools the WEN 5″ Metal-Cutting Benchtop Bandsaw is the superior tool for the job. It is not a stretch for me to go ahead and call this tool the best benchtop bandsaw out there. Great value!

READY TO BUY, CLICK HERE TO ORDER

 

Best Metal Cutting Band Saw Review

Introduction

I purchased my FOX 7” X 12” band saw recently. I did extensive research online and “in real life” beforehand, and I can connect the dots for you if you’re in the market for one of these. If you’re searching for the best metal cutting band saw, this one is definitely in the top 3. Like with any machine, it depends a bit on what you need it to do. If it does match your needs, then I can confirm it is dependable, consistent, accurate and a valuable tool in completing my home and work projects.

SHOP FOX M1014 Features

First of all, I am a contractor with a small crew and work out of a home office. I need a saw like this for semi-pro work, and the bigger jobs that sometimes come with it. If you are just looking for smaller cuts that don’t need as much power and versatility, like what comes up at home (e.g. cutting aluminum or 1/8 inch and other smaller size stock), you’re maybe looking at the wrong machine.

 

For smaller jobs, I would recommend a smaller metal-cutting automatic band saw, like a 4 X 6 incher from Grizzly. Also, this is just me, but you can put a metal-cutting blade on a wood saw if it lets you control the speed. Wood saws can go over 2000 sfpm and you need slower speeds for cutting metal. The process does eat blades faster that way, though. So, it’s a true cheat; it works, but there is a cost.

 

The online review that says that the FOX is ideal for “production shops”. That’s accurate. I have a friend who works in a machine shop and he uses the 7” X 12” FOX and other machines from the same company. He uses it when he needs to make many cuts repeatedly and quickly on stock larger than what the smaller machines can handle.

 

Some of what gets cut in the shop with this unit is 16 or 20-gauge square tube, 4” pipe, 2x2x.25″ pieces of tubing and bars. In other words, my friend works in production, and the saw helps him $produce$.

 

We’ve both had issues with chopping smaller pieces of metal, with the cuts being rougher because of the big teeth on the blade for the 7” X 12”, so watch out for that, and make sure you have more than just the blade it came with. It’s easy to find the blades for this machine. I have bought 5 different blades now with no issues, and one of them cuts smaller pieces cleanly.

 

Little things matter a lot to me, and this saw has a few little perks I did not know before buying. For one, you’ll be super happy with how little clean-up is needed after cut jobs. Very neat cuts. Second, something that surprised me was how quiet the FOX saw is. This isn’t a big deal, but it’s worth telling you that, compared to my abrasive chop saws, this is a hell of a lot quieter. I can cut at night without worrying about waking up neighbors. In a machine shop this doesn’t matter, obviously.

 

Whatever bandsaw you’re buying, don’t forget to read good reviews and lots of them so you know what you’re getting into. I’ve been burned (not on cutters) and I know what I am doing most of the time! Other than what I’ve said already, the reviews for the FOX 7” x 12” are true. Legit features:

 

■     The power needed for big jobs

■     Rectangular and circular cutting capacity

■     Ability to cut angles

■     Four blade speeds

■     Hydraulic Feed

■     Stand included

■     Wheels

■     Coolant system

■     Useful vise

 

SHOP FOX M1014 Best metal cutting band saw

Technical Details

 

HP 1.0, Speed RPM 90, 135, 195, 255,

Volts 110/220V pre-wired 110V,

Blade Included Yes,

Blade Size L x W x Thickness in. 93 x 3/4,

Dimensions L x W x H in. 48 x 16 x 37 5/8,

Stand Included Yes.

Automatic shutoff Hydraulic feed control Quick-positioning vise Coolant system 1 1/2-gallon capacity

Max. capacity circular @ 90 7in.

Max. capacity rectangular @ 90 7in. x 12in.

Max. capacity circular @ 45 5in.

Max. capacity rectangular @ 45 4 3/4in. x 4 1/2in.

Footprint 13in. x 38in.

 M1014 Bandsaw

Pros & Cons

 

ProsCons
–       Speed. Can handle lots of precise cuts quickly.

–       Powerful (cuts 16 gauge like butter)

–       Clean cuts

–       Quiet

–       Competitive price

–       Made in China

–       Vertical cuts are awkward

–       Smaller cuts can be rough and need to buy other blades

Best Metal Cutting Band Saw Final Thoughts

Overall, if you’re looking for the best metal cutting band saw, the FOX 7” X 12” could be it. The price is right, it has the power to handle big cutting jobs quickly, precisely, neatly, and has more versatility than other horizontal band saws this size. 16 gauge is like butter to the FOX. If you know you’ll need bigger stuff cut, this is the saw I recommend.

 

Click Here To Order A SHOP FOX M1014 7-Inch by 12-Inch Metal Bandsaw

 

Best small bandsaw Grizzly G0622

Introduction

I just got one of these Grizzly Metal-Cutting Bandsaws (4 x 6-Inch) two months ago. I’m a civil engineer at work, but at home, I am an inventor / innovator. I have a few patents and more on the way. I like my Grizzly, and, I dare say, it’s the best small bandsaw out there. I call it The Griz 4:16. This review is half about this quality product and half about the reviews I read before buying it!

Grizzly G0622 Features

 

The main feature, for me, is The Griz 4:16 (from here I’ll just call it The Griz) has gotten all my many odd cutting jobs done with perfect accuracy, so far. I ordered a horizontal 4 X 6 inch metal cutting band saw, and I got one that did just that, efficiently and consistently. My projects are all moving along smoothly thanks to its precise and dependable cutting power.

 

The Griz includes a vertical cutting attachment, which I have not yet used, but seems sketchy. This is fine, even if it is as unreliable for vertical cuts as I think it might be. I purchased a horizontal saw and that’s what it does. Anything extra is bonus.

 

If you’re looking at reviews and you see the negative impressions of the vertical cutting prowess of this horizontal saw, and others in its class, for that matter, keep your perspective! Vertical cuts are an extra feat you can achieve with this very reasonably priced horizontal metal cutting bandsaw.

 

The saw has maximum 4-1/2″ round and 4-1/2″ x 6″ rectangular cutting capacity. It is movable, but I don’t need to move it around my shop much. It has the wheels these units usually have, and that’s good. If you’re going to need to move The Griz around a lot, you should look into the sturdiness of the wheels. I’ve heard both good and bad about this, and my personal experience is the wheels look okay, but, as I said, I have not tested out the theory.

 

This is a bit of a rant, but, before purchasing the unit, I read about it’s being “too heavy”, which makes shipping dicey. Mine shipped fine. If any problems did come up, I know I could just get it resolved through customer service at Amazon or the shipping company. This is what everyone should expect in first world country commerce! What else should you expect?

 

In all the research I did before buying my Griz saw, any complaints about weight were followed up with “but Amazon was really good and replaced it”, or something like that. No one was left high and dry. Yes, solid, quality, cast iron tools are heavy. Yes, that means shipping can lead to problems. I am mentioning it in case weight is an issue for some other reason in your shop, but not to gripe about the first class shipping the 21st century provides. It’s heavy. I included the specs from the Amazon page below.

 

Ultimately, I found the reviews on Amazon and elsewhere on the Internet to be helpful, and on top of what I mentioned above, here’s what else the reviews say that you can count on receiving:

 

  • The automatic shut off on the switch is useful
  • The variable speed selection is the thing you didn’t know you needed before you got started cutting metal, and now can’t live without. You’ll learn to appreciate the 3 speeds (78, 108, or 180-ft per minute).
  • The standard sized blade! Much easier to find than some other saws. Also, The Griz comes with a blade, which is always a plus.
  • Sized nicely. Doesn’t take up too much room in your shop / garage, we regard this as the best small bandsaw for the specs.

 

The features, such as they are, make the pros and cons list almost comically lopsided. All I can say is check out the unit for yourself. It does what it does right. It probably does what it doesn’t do not so well. I can’t, in my experience as an owner / operator and metal cutting hobbyist, count that as a fault.

 

Grizzly G0622 Best small bandsaw

 

Technical Details

Motor: 3/4 HP, 110V, single-phase, 1725 RPM –
Max. capacity circular: 4-1/2″ dia. –
Max. capacity rectangular: 4-1/2″ x 6″ –
Blade speeds: 78, 108, 180 FPM –
Included Blade size: 64-1/2″ x 1/2″ x 14 TPI –
Approx. shipping weight. 127 lbs. –
Product Dimensions 14 x 39 x 15 –
Power Source: Corded-electric

Pros & Cons

 

ProsCons
Blades are standard and easy to find / buy;

 

Variable speed is perfect for all the types of materials you need to cut;

 

Automatic shutoff is handy;

 

Doesn’t take up much space in your shop;

 

Its online reviews seem legit.

 

Its heaviness might be a concern for those purchasing for mobility. Buyers urged to kick the wheels;

 

Probably doesn’t do excellently what these machines don’t do well (i.e. vertical cuts).

 

 

Best Small Bandsaw Final Thoughts

As I said, I think the Grizzly Metal-Cutting Bandsaw, 4 x 6-Inch is the best small bandsaw in its class. You can count on it to do what it does well, as advertised. I took one for the team, and it payed off. You’re welcome. All kidding aside, I think the few problems I’ve read about it online all boil down to consumers who just bought the wrong tool for the types of projects they wanted to do. Some people just need the bigger, more expensive machine that is expected to be heavy, sturdy and able to make a vertical cut without fail.

 

Order Your Grizzly G0622 Metal-Cutting Bandsaw,  By Clicking Here