Archive

Category Archives for "Guides & Tips"

How To Fold A Bandsaw Blade

Ever Wondered How To Fold A Bandsaw Blade?

We’re looking here at the best way on how to fold a bandsaw blade. Anyone who is even slightly familiar with a bandsaw blade can tell you that these somewhat problematic blades have been known to behave in a similar fashion to that of a snake. When buying, shipping, or otherwise transporting one, it is extremely important that you understand exactly how you should handle it. The proper handling of a bandsaw blades is crucial to avoid serious injury.

Pulling a bandsaw blade apart in order to use it can be a tricky feat in itself. Folding it up is likewise, by all means, a skill unto itself. Having spent many years working for a father, and father-in-law, who are general contractors has given me the experience and inside perspective to properly inform you on the best methods for safely unfolding and folding a bandsaw blade.

To unfold a bandsaw blade which is already coiled, you have to carefully unfold the blade feeling for the pressure in the blade as you go. As you slowly pull the blade apart it will release itself from its coil properly and automatically as long as you don’t go against the natural releasing of pressure.

While there is no actual formula for opening a bandsaw blade that is universally recognized, the above mentioned method is safe and works like a charm everytime.

Now for the fun part: how to fold a bandsaw blade properly.

Once you have used your blade, whether for a single job and you need to place it back in its packaging, or you’ve worn the blade to the point that it needs to be packaged for shipping to a repair company, there is a proper method for folding the blade that is easy to follow.

how to fold a band saw blade correctly

Often times, especially for those not familiar with operating a bandsaw, this can be extremely tricky the first time around. However, it gets easier as you go. The manufacturers instructions themselves are usually of very little help. Following instructions that are hard to understand and make little to no sense at all can be very hazardous to your safety. The improper folding of a bandsaw blade can result with your hands becoming caught in the barbed teeth of the bandsaw.

Follow these simple steps on how to fold a bandsaw blade:

Hold the bandsaw blade out in front of you. Make sure that the teeth are facing down.

Slightly rest one end of the bandsaw blade against your stomach. Now the other end against a stationary surface like the edge of a worktable.

Slowly begin to cross your arms, as you do you will feel the natural pressure of the saw blade transforming the itself into a properly folded figure-eight-like shape.

Simply bring the loose ends together to complete the process and you’re finished.

Yes, it is truly as simple as that. This is not only the easiest method, it is also the safest. You will not find a more effective technique for folding your bandsaw blade. This is one that works without fail every time you use it. Stop putting yourself in danger and start putting this powerful tip to use!

POWER SAW SAFETY & CARE

If you’ve ever watched any of the tv shows that show accidents in the workplace, then you’ve seen people who have lost fingers, thumbs even hands or worse. Now we’re not trying to scare you here, instead we are asking you to take that extra bit of care. I’ve known friends end up with injuries from chipped drills where they’ve not been wearing safety glasses, guys who were welding and not wearing the correct welding eye protection. Don’t let the same injuries some about from using your saw. This is why power saw safety & care are so important.


When using a power saw  there are some safety tips that should be used. Safety is a number one priority when it comes to using a power saw. Being safe with your band saw can benefit yourself as well as others. A power saw can be really dangerous if you do not know how to handle it. Power saws can cause severe injuries to you or someone else if it is not used in a safe manner. Here are some safety tips that will be helpful in avoiding injuries when using a power saw.

 

Keep An Eye On The Job

One important safety measure to take when operating your power saw is to always pay attention to your work and never look away when you are operating the saw. It’s easy to become distracted.

The second important safety tip would be to never use your hands to clean the scrap from the table, instead use a long stick, but only after ensuring the saw has been switched off. Never try to clear a blockage while the saw is running, the consequences could be severe.

 

The third safety measure would be to always let the saw reach it’s full speed before starting to cut. It may be tempting to try an early cut, to save time or if you’re in a rush, but don’t do this. Give the saw chance to get running properly.

 

The fourth safety tip is to never leave your saw running unattended, as tempting as it is. This applies in any workspace where people can enter and wander around, so extra vigilance is required, more so especially around children. We looked at tips for using a power saw in a previous article

 

 

Power Saw Safety & Care Final Thoughts

Power saws have been known to cause serious hand injuries. If safety measures are taken then injuries can be avoided. Hands are often the most vulnerable because they are used for guiding the saw and the wood to be cut. Large area of skin could be damaged or torn off if you do not take safety measures. Severe injuries can happen such as a loss of fingers or even the hand. It is very important that you pay close attention to what you are doing. Why not consider a fence to help guide the wood when using your saw? A good quality table saw fence could be the difference between working safely to get a straight cut or not.


Using A Power Saw

So we’re not trying to teach anyone to suck eggs here, but instead we’ve put together a basic introduction to using a power saw. Finding it hard to choose between band saw vs table saw or  even a drop saw?  There’s dozens of different types of saw, the world isn’t just band saw led. Without further ado, let’s have a look at the other types of saws available.

Using A Power Saw

Power saws useful for a range of DIY jobs. No DIY project is too big or small for your power saw. Power saws are available in a number of sizes and power ratings so you will be able to find the right power saw for almost any job. Some of the latest models even have infrared lights that assist you with cutting. This helps you cut in a straight line.

The chainsaw is a common power saw used to cut timber – it also stars in a number of low budget movies. They are especially useful for yard work – trimming and cutting down trees. The only disadvantage with chainsaws is that it is not a smooth cut – this may result in a degree of splintering. You should wear safety gear when operating a power saw.

Circular saws have a range of home DIY functions and are an essential tool in any home handyman’s arsenal. Its versatility makes it the ideal power tool for jobs around the home especially if you don’t have the budget to buy a power saw for every task. Circular saws can easily cut through thick wood. Choose a model that has sufficient power for you needs.

For cross cutting a miter saw is a useful addition to your tool box. It cuts exact angles and lengths. Scroll saws are useful if you intend doing detailed work. Both of these power saws will add value if you are a woodworking enthusiast.

If you are planning on cutting thin flexible material like paneling then a saber saw is recommended. Another name for a saber saw is a jigsaw. Choose a model that is sturdy and also fits your hand comfortably. You need to use quality blades with a saber saw as it the blades that determine the quality of your cutting.

 

Band Saw Vs Table Saw

Bigger pieces of wood will require a table saw. Basically it is a table with the blade situated in the middle of the table. Still asking yourself band saw vs table saw, which is best? It all depends on the job at hand.

If you want to cut material away from the edge then you will require a band saw. It consists of a small table with a blade that operated from the top , this allows it to cut anywhere on a piece of wood. All that is required to accurately cut is to clamp the wood and then position the blade where you want to cut. Common uses would be to cut door handles and wall plugs.

Cutting across the grain requires a crosscut saw. A smaller version of a circular saw is the rip saw. If you need to make small curved cuts into paneling or dry wall then you need to use a keyhole saw.

Makita XRJ01Z 18V LXT Lithium-Ion Cordless Compact Reciprocating Saw

Power saws are very durable won’t require replacing for a long time. You should ideally store the power saw safely where the blades won’t pose a safety risk. Always unplug immediately after use. Proper care of the blade is important as they tend to become rusty if not used often. Cleaning the blade after use will prevent rust from building up. You shouldn’t operate a saw with rusty or bent blade. It can be a safety risk.

 

 

 

It is recommended that you wear safety glasses when operating a power saw. Also make sure that any guards provided by the manufacturer are fitted and used properly. Read the manual before using so that you are aware of all the features and safety issues. Also make sure that you are using the right saw for the job